Anvil® 0500007422 FIG 86 C-Clamp With Set Screw and Lock Nut, 5/8 in Rod, 440 lb, Malleable Iron

09900185 MFG #: 0500007422
Anvil® C-Clamp, Series: FIG 86, 5/8 in Rod, 440 lb, 60 in-lbs Torque, Malleable Iron, 450 deg F
  • For attachment to "W" and "M" beams where thickness of flange Z does not exceed 0.75 in, W
  • For attachment to "W
  • Malleable body assures: Uniform quality and strength, full thread engagement
  • Malleable body assur
  • Hardened steel cup point set screw for securing to beam flange
  • Hardened steel cup p
  • Ribbed design of clamp provides added strength
  • Ribbed design of cla
  • Installation: follow recommended set screw torque values per MSS-SP-69 and the Fig. 88 is
  • Installation: follow
  • 60 in-lbs torque
  • 60 in-lbs torque
For attachment to "W" and "M" beams where thickness of flange Z does not exceed 0.75 in, When clamp is used with Fig 89 retaining clip, flange thickness may not exceed 0.62 in
• For attachment to "W" and "M" beams where thickness of flange Z does not exceed 0.75 in, When clamp is used with Fig 89 retaining clip, flange thickness may not exceed 0.62 in
Malleable body assures: Uniform quality and strength, full thread engagement
• Malleable body assures: Uniform quality and strength, full thread engagement
Hardened steel cup point set screw for securing to beam flange
• Hardened steel cup point set screw for securing to beam flange
Ribbed design of clamp provides added strength
• Ribbed design of clamp provides added strength
Installation: follow recommended set screw torque values per MSS-SP-69 and the Fig. 88 is only to be used on installations where the clamp cannot become dislodged from the beam
• Installation: follow recommended set screw torque values per MSS-SP-69 and the Fig. 88 is only to be used on installations where the clamp cannot become dislodged from the beam
60 in-lbs torque
• 60 in-lbs torque