Cleveland® C46204 610 Single End Center Reamer/Countersink, 3/8 in Dia Body, 1/4 in Dia Shank, 4 Flutes, 60 deg Included, HSS
25446204
MFG #: C46204
$0.00
/ Each
Item currently not in stock. Lead time based upon availability from the manufacturer.
- Type: Single End
- Series: 610
- Body Diameter: 3/8
- Overall Length: 1-3/4
- Shank Type: Straight
- Shank Diameter: 1/4
- Number of Flutes: 4
- Cutting Direction: Right Hand
- Included Angle: 60
- Centerline Angle: 30
- Material: HSS
- Finish: Steam Oxide
Cleveland® Center Reamer/Countersink, Single End, Series: 610, 3/8 in Diameter Body, 1-3/4 in Overall Length, Straight Shank, 1/4 in Shank Diameter, 4 Flutes, Right Hand Cutting Direction, 60 deg Included Angle, 30 deg Centerline Angle, HSS, Steam Oxide
- Used to countersink
- Used to countersink flat head screws and rivets
- Use single flute cou
- Use single flute countersinks for smaller holes, multi-flute tools countersink much larger
- Run countersinks at
- Run countersinks at 50 to 66% of recommended drill speeds
- The pre drilled hole
- The pre drilled hole for countersinking should not be less than 10% of the countersink dia
Used to countersink flat head screws and rivets
Used to countersink flat head screws and rivets
Use single flute countersinks for smaller holes, multi-flute tools countersink much larger holes
Use single flute countersinks for smaller holes, multi-flute tools countersink much larger holes
Run countersinks at 50 to 66% of recommended drill speeds
Run countersinks at 50 to 66% of recommended drill speeds
The pre drilled hole for countersinking should not be less than 10% of the countersink diameter
The pre drilled hole for countersinking should not be less than 10% of the countersink diameter