Loctite® 1317148 5203™ Flange Sealant, 300 mL Cartridge
03872539
MFG #: 1317148
$0.00
/ Each
Item currently not in stock. Lead time based upon availability from the manufacturer.
- Series: 5203™
- Container Type: Cartridge
- Container Size: 300
- Chemical Type: Dimethacrylate
- Base Type: Dimethacrylate
- Composition: Dimethacrylate Terminated Urethane Polyester, Meth Acrylate Polyethylene Glycol Mw 200, Ethane, Tetrafluoro-, Homopolymer, Silica, Amorphous, Fumed, Crystal-Free, Cumene Hydroperoxide, Polyglycol Dimethacrylate, 2-Hydroxyethyl Meth Acrylate 1-Acetyl-2-Phe
- Form: Liquid
- Curing Time: 24
- Color: Red
- Adheres to: Metal
- Odor/Scent: Mild
- Temperature Rating: -65 to 300
- Specific Gravity: 1.15
- Flash Point: >212
- Viscosity Rating: 50000 to 100000 mPs
- Applicable Materials: Metal
- Tensile Strength: 290 to 870
- Shear Strength: 145 to 725
Loctite® Flange Sealant, Series: 5203™, Cartridge Container, 300 mL Container, Dimethacrylate Chemical Type, 24 hr Curing, Red, -65 to 300 deg F, 1.15 Specific Gravity, Metal Adheres to
- Loctite® 5203™ flang
- Loctite® 5203™ flange sealant seals close fitting joints between rigid metal faces and fla
- Provides resistance
- Provides resistance to low pressures immediately after assembly of flanges
- Cures rapidly when c
- Cures rapidly when confined in the absence of air between close fitting metal surfaces
- Fully cured product
- Fully cured product can easily be removed from flange faces, particularly on aluminum
- Typically used as a
- Typically used as a form-in-place gasket on rigid flanged connections, e.g. gearbox and en
- Thixotropic nature o
- Thixotropic nature of Loctite® 5203 reduces the migration of liquid product after applicat
Loctite® 5203™ flange sealant seals close fitting joints between rigid metal faces and flanges
Loctite® 5203™ flange sealant seals close fitting joints between rigid metal faces and flanges
Provides resistance to low pressures immediately after assembly of flanges
Provides resistance to low pressures immediately after assembly of flanges
Cures rapidly when confined in the absence of air between close fitting metal surfaces
Cures rapidly when confined in the absence of air between close fitting metal surfaces
Fully cured product can easily be removed from flange faces, particularly on aluminum
Fully cured product can easily be removed from flange faces, particularly on aluminum
Typically used as a form-in-place gasket on rigid flanged connections, e.g. gearbox and engine casings, etc
Typically used as a form-in-place gasket on rigid flanged connections, e.g. gearbox and engine casings, etc
Thixotropic nature of Loctite® 5203 reduces the migration of liquid product after application to the substrate
Thixotropic nature of Loctite® 5203 reduces the migration of liquid product after application to the substrate