PFERD 45240 Mount Coated Flap Wheel, 2 in Dia Wheel, 1 in W Face, 1/4 in Dia Shank, 120 Grit, Fine Grade, Aluminum Oxide Abrasive
00469264
MFG #: 45240
$0.00
/ Each
Ships within 5 days
- Type: Mount, Mounted Standard
- Wheel Diameter: 2
- Diameter: 2
- Face Width: 1
- Shank Diameter: 1/4
- Grit: 120
- Grit/Grade: 120/Fine
- Abrasive Material: A Aluminum Oxide, Aluminum Oxide
- Grade: Fine
- Width: 1
- Arbor/Shank Size: 1/4
- Backing Material: Cloth
- Attachment Type: Arbor, Shank
- Applicable Materials: All Materials
- Maximum Speed: 23000
PFERD Coated Flap Wheel, Mount, 2 in Wheel Dia, 1 in Face Width, 1/4 in Shank Dia, 120 Grit, Fine Grade, Aluminum Oxide Abrasive, 23000 rpm Maximum, Arbor Attachment
- Flap wheels with 1/4
- Adapt readily to irr
- Flap wheels with 1/4 in shank and aluminum oxide A grain are universally suitable for all
- Can be used in flat
- High flexibility
- High stock removal d
- Can be profiled to c
- High stock removal due to aggressive coated abrasive
- Flaps wear off unifo
- 1 in length
- Flaps wear off uniformly and without residue on the workpiece surface, exposing fresh, sha
- Due to the special c
- 7000 rpm recommended
- Due to the special cast core construction, the face of the tool can be worked up very clos
Flap wheels with 1/4 in shank and aluminum oxide A grain are universally suitable for all materials
• Adapt readily to irregular surfaces
Flap wheels with 1/4 in shank and aluminum oxide A grain are universally suitable for all materials
• Can be used in flat surfaces and in difficult to reach areas
High flexibility
High stock removal due to aggressive coated abrasive
• Can be profiled to contours of the workpiece
High stock removal due to aggressive coated abrasive
Flaps wear off uniformly and without residue on the workpiece surface, exposing fresh, sharp abrasive grain at all times
• 1 in length
Flaps wear off uniformly and without residue on the workpiece surface, exposing fresh, sharp abrasive grain at all times
Due to the special cast core construction, the face of the tool can be worked up very close to the edges and corners
• 7000 rpm recommended speed
Due to the special cast core construction, the face of the tool can be worked up very close to the edges and corners