PFERD

PFERD 45753 Unmounted Coated Flap Wheel, 4-1/2 in Dia Wheel, 3/4 in W Face, 60 Grit, Coarse Grade, Aluminum Oxide Abrasive

00469281 MFG #: 45753
$0.00 / Each
Ships within 5 days
PFERD 45753 Unmounted Coated Flap Wheel, 4-1/2 in Dia Wheel, 3/4 in W Face, 60 Grit, Coarse Grade, Aluminum Oxide Abrasive
  • Type: Unmounted
  • Wheel Diameter: 4-1/2
  • Diameter: 4-1/2, 4-1/2 in
  • Face Width: 3/4
  • Grit: 60
  • Grit/Grade: 60/Coarse
  • Abrasive Material: Aluminum Oxide
  • Grade: Coarse
  • Arbor/Shank Size: 5/8-11
  • Center Hole Thread Size: 5/8-11
  • Backing Material: Cloth
  • Attachment Type: Thread, Threaded
  • Applicable Materials: Non-Ferrous Metals and Light Alloy
  • Maximum Speed: 13300, 13300 rpm
PFERD Coated Flap Wheel, Unmounted, 4-1/2 in Wheel Diameter, 3/4 in Face Width, 60 Grit, Coarse Grade, Aluminum Oxide Abrasive, 13300 rpm Maximum, 5/8-11 Center Hole Threaded, Cloth Backing, Threaded Attachment
QTY
Add to List
  • High flexibility
  • Constructed with coa
  • High stock removal due to aggressive coated abrasive
  • High stock removal d
  • Due to their flexibi
  • Carrier material wears off uniformly and without residue on the workpiece surface, meaning
  • Carrier material wea
  • The abrasive grain i
  • Due to the special mounting system, the face of the wheel can be worked up very close to t
  • Due to the special m
  • Perform best at the
  • Threaded mounting
  • 3/4 in face width
  • Resin bond
  • 7500 rpm recommended
High flexibility
• Constructed with coated abrasive elements arranged radially about the tool axis in a fan-type configuration
High stock removal due to aggressive coated abrasive
High stock removal due to aggressive coated abrasive
• Due to their flexibility, they adapt ideally to the contours of the workpiece
Carrier material wears off uniformly and without residue on the workpiece surface, meaning that sharp abrasive grit is exposed at all times
Carrier material wears off uniformly and without residue on the workpiece surface, meaning that sharp abrasive grit is exposed at all times
• The abrasive grain is embedded in a resinoid bond on the strong flexible backing cloth
Due to the special mounting system, the face of the wheel can be worked up very close to the edges and corners
Due to the special mounting system, the face of the wheel can be worked up very close to the edges and corners
• Perform best at the recommended cutting speed of 7800 - 9800 sfpm
• Threaded mounting
• 3/4 in face width
• Resin bond
• 7500 rpm recommended speed