PFERD 45755 Unmounted Coated Flap Wheel, 4-1/2 in Dia Wheel, 3/4 in W Face, 120 Grit, Fine Grade, Aluminum Oxide Abrasive

00469283 MFG #: 45755
$0.00 / Each
Ships within 5 days
  • Type: Unmounted
  • Wheel Diameter: 4-1/2
  • Diameter: 4-1/2, 4-1/2 in
  • Face Width: 3/4
  • Grit: 120
  • Grit/Grade: 120/Fine
  • Abrasive Material: Aluminum Oxide
  • Grade: Fine
  • Arbor/Shank Size: 5/8-11
  • Center Hole Thread Size: 5/8-11
  • Backing Material: Cloth
  • Attachment Type: Thread, Threaded
  • Applicable Materials: Non-Ferrous Metals and Light Alloy
  • Maximum Speed: 13300, 13300 rpm
PFERD Coated Flap Wheel, Unmounted, 4-1/2 in Wheel Diameter, 3/4 in Face Width, 120 Grit, Fine Grade, Aluminum Oxide Abrasive, 13300 rpm Maximum, 5/8-11 Center Hole Threaded, Cloth Backing, Threaded Attachment
QTY
  • Constructed with coa
  • High flexibility
  • High stock removal d
  • Due to their flexibi
  • High stock removal due to aggressive coated abrasive
  • Carrier material wea
  • The abrasive grain i
  • Carrier material wears off uniformly and without residue on the workpiece surface, meaning
  • Due to the special m
  • Perform best at the
  • Due to the special mounting system, the face of the wheel can be worked up very close to t
  • Threaded mounting
  • 3/4 in face width
  • Resin bond
  • 7500 rpm recommended
• Constructed with coated abrasive elements arranged radially about the tool axis in a fan-type configuration
High flexibility
High stock removal due to aggressive coated abrasive
• Due to their flexibility, they adapt ideally to the contours of the workpiece
High stock removal due to aggressive coated abrasive
Carrier material wears off uniformly and without residue on the workpiece surface, meaning that sharp abrasive grit is exposed at all times
• The abrasive grain is embedded in a resinoid bond on the strong flexible backing cloth
Carrier material wears off uniformly and without residue on the workpiece surface, meaning that sharp abrasive grit is exposed at all times
Due to the special mounting system, the face of the wheel can be worked up very close to the edges and corners
• Perform best at the recommended cutting speed of 7800 - 9800 sfpm
Due to the special mounting system, the face of the wheel can be worked up very close to the edges and corners
• Threaded mounting
• 3/4 in face width
• Resin bond
• 7500 rpm recommended speed