DeWALT® 7438SD1-PWR SD1 Expansion Wedge Anchor, 5/8 in Dia, 8-1/2 in OAL, 6-1/2 in L Thread, Carbon Steel, Zinc Plated
08362812
MFG #: 7438SD1-PWR
$0.00
/ Each
Item currently not in stock. Lead time based upon availability from the manufacturer.
- Type: Expansion
- Series: SD1, Wedge-All®
- Diameter: 5/8
- Overall Length: 8-1/2
- Thread Length: 6, 6-1/2
- Material: Carbon Steel
- Finish: Zinc Plated
- Minimum Embedment Depth: 2-3/4
- Head Size: 15/16
- Drill Size: 5/8
- Head Type: Hex, Threaded Stud
- Thread Size: 5/8-11
- Head Style: Hex
- Thread Type: UNC
- Maximum Work Thickness: 5-1/8
- Shear Strength: 1699, 6815
- Tensile Strength: 120, 5440, 6285
DeWALT®, 7438SD1-PWR, Expansion Wedge Anchor, Series: SD1, 5/8 in Diameter, 8-1/2 in Overall Length, 6-1/2 in Thread Length, Carbon Steel, Zinc Plated, 2-3/4 in Minimum Embedment Depth, 5/8 in Drill, 5/8-11 Thread, Threaded Stud Head, UNC Thread, 5-1/8 in Maximum Work Thickness, 6815 lb Shear Strength, 6285 lb Tensile Strength
- Consistent performan
- Consistent performance in high and low strength concrete
- Code listed under IB
- Anchor can be instal
- Nominal drill bit si
- Nominal drill bit size is the same as the anchor diameter
- One-piece, wrap-arou
- Nominal drill bit di
- Anchor can be installed through standard fixture holes
- Threaded end is cham
- Length ID code and i
- Anchor design allows for follow-up expansion after setting under tensile loading
- Available in a wide
- Allowable load capac
- Length ID code and identifying marking stamped on head of each anchor
- Carbon steel ASTM A5
- Anchor design allows
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate
- The minimum concrete
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck an
- The allowable loads
- Normal weight concre
- 11/16 in minimum fix
- 90 ft-lb installatio
- 4520 lb at 2000 psi/
- 8720 lb at 2000 psi
- Anchor body material
Consistent performance in high and low strength concrete
Consistent performance in high and low strength concrete
• Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
Anchor can be installed through standard fixture holes
Nominal drill bit size is the same as the anchor diameter
Nominal drill bit size is the same as the anchor diameter
• One-piece, wrap-around clip ensures uniform holding capacity
Nominal drill bit diameter same as Anchor diameter
Anchor can be installed through standard fixture holes
• Threaded end is chamfered for ease of starting nut
Length ID code and identifying marking stamped on head of each Anchor
Anchor design allows for follow-up expansion after setting under tensile loading
• Available in a wide range of diameters and lengths
Allowable load capacity - 1240 lb tensile strength when embedded in 2500 psi, 1360 lb tensile strength when embedded in 3000 psi, 1570 lb tensile strength when embedded in 4000 psi normal-weight concrete
Length ID code and identifying marking stamped on head of each anchor
• Carbon steel ASTM A563 grade A nut
Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
• The minimum concrete thickness is 1-1/2 times the embedment depth
Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
• The allowable loads are based on a safety factor of 4
Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
• 11/16 in minimum fixture hole
• 90 ft-lb installation torque
• 4520 lb at 2000 psi/8600 lb at 4000 psi ultimate tension loads and 1130 lb at 2000 psi, 1640 lb at 3000 psi, 2150 lb at 4000 psi for concrete
• 8720 lb at 2000 psi ultimate shear loads and 1620 lb at 2000 psi, 1900 lb at 3000 psi, 2180 lb at 4000 psi for concrete
• Anchor body material meets minimum 70000 psi tensile strength